Month: January 2017
Refer to the exhibit.
Switch port FastEthernet 0/24 on ALSwitch1 will be used to create an IEEE 802.1Q-compliant trunk to another switch. Based on the output shown, what is the reason the 200-125 dumps trunk does not form, even though the proper cabling has been attached?
A. VLANs have not been created yet.
B. An IP address must be configured for the port.
C. The port is currently configured for access mode.
D. The correct encapsulation type has not been configured.
E. The “no shutdown” command has not been entered for the port.
Correct Answer: C Explanation
According to the output shown the switchport (layer 2 Switching) is enabled and the port is in access mode. To make a trunk link the port should configured as a trunk port, not an access port, by using the 200-125 vce following command: (Config-if)#switchport mode trunk.
Which port state is introduced by Rapid-PVST?
Correct Answer: C Explanation
PVST+ is based on IEEE802.1D Spanning Tree Protocol (STP). But PVST+ has only 200-125 3 port states (discarding, learning and forwarding) while STP has 5 port states (blocking, listening, learning, forwarding and disabled). So discarding is a new port state in PVST+.
Cisco https://www.lead4pass.com/300-115.html pdf exam is designed to ensure everything which you need to pass your exam successfully. New Cisco 300-115 practise, we have a completely customer oriented policy. We invite the rich experience and expert knowledge of professionals from the IT certification industry to guarantee the PDF details 300-115 precisely and logically. Our customers’ time is a precious concern for us. This requires us to provide you the products that can be utilized most efficiently.
What does the command vlan dot1q tag 300-115 native accomplish when configured under global configuration?
A. All frames within the native VLAN are tagged, except when the native VLAN is set to 1.
B. It allows control traffic to pass using the non-default VLAN.
C. It removes the 4-byte dot1q tag from every frame that traverses the trunk interface(s).
D. Control traffic is tagged.
Correct Answer: D Explanation
The “vlan dot1q tag native” will tag all untagged frames, including control traffic, with the defined native VLAN.
A network engineer has just deployed a non-Cisco device in the network and wants to get information about it from a connected device. Cisco Discovery Protocol is not supported, so the open 300-115 dumps standard protocol must be configured. Which protocol does the network engineer configure on both devices to accomplish this?
The only way to get success in the Cisco https://www.lead4pass.com/642-999.html exam is that you should obtain reliable preparatory materials. We promise that is the most direct pathway towards Cisco Implementing Cisco Data Center Unified Computing certificate. You will be victorious with full confidence.
You can have a free attempt Pass exam dump before you buy the Cisco 642-999 pdf exam products. Our simulated tests are in multiple-choice the same as the real exam pattern. The questions and answers created by the certified professors provide you with the experience of taking the real test. 100% guarantee to pass the Cisco 642-999 actual test.
Our PDF of 642-999 exam is designed to ensure everything which you need to pass your exam successfully. We have a completely customer oriented policy. We invite the rich experience and expert knowledge of professionals from the IT certification industry to guarantee the PDF details precisely and logically. Our customers’ time is 642-999 dumps a precious concern for us. This requires us to provide you the products that can be utilized most efficiently.
When upgrading a standalone Cisco UCS C-Series server, which method iscorrect?